On this project we brought out a 2 man crew to beautiful Austin Texas to unpack & install a 6’x4’ glass whiteboard on standoffs in a family office space.
First step was to unpack and make sure all hardware and pieces were accounted for. Once we got everything out of the box we proceeded to spec out the wall. The customers wanted the board centered on the wall and about 43” from the ground.
Now that the center of the wall was marked, we continued to mark with blue painters tape the left and right side of the board on the wall. This gives you a visual mark when holding the board up in the next step.
After Specking the wall, next was to have both installers hold up the board between the blue tape on the wall. While holding the board flush to the wall use a small 6” hand level to confirm the whiteboard is level.
While STILL holding the board Make sure your level shows in the middle, mark your top holes with a pencil. These marks will be where you punch for the hardware (Standoffs)
After you have securely fastened the anchors with the standoffs hold your whiteboard up and attach the tops through the whiteboard mounting the top.
Then repeat the process for you bottom holes. You now have a very secure and aesthetic appealing marker board in your home or business office. Please visit http://www.fostersartinstallation.com to request an appointment for this type of installation or art hanging/ picture install. You may also call 972-416-7765 or 512-257-1896.